Glass carving is an artistic technique used for inscription of creative designs as well as symbols. There is a technique known as sand-carving that was developed in the late 19th century and is used for creation of multilevel abrasive etchings on glasses. After etching of the design into the glasses, there is addition of light and shadow details. In considering glass carving Alberta residents should appreciate its uses; creation of gemstone, windows, sculptures and more.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
When the cleaning of the surface is done with, the surface has to get wiped with a soft cloth. This ensures that it is dry. Also very essential is choosing of the right design that will be carved. Stencil is recommended by most professionals of the arts and craft because with it, there are designs that are already existing. Some stencils come with adhesive backing to ensure they completely adhere to the piece.
For purposes of safety, one should wear goggles and latex gloves during the exercise. There are very strong fumes that are produced from the cream which have diverse effects on different people. People with sensitive eyes especially would have to wear goggles, lest their eyes be affected further. People that are allergic to latex should use rubber gloves or vinyl.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
There should be removal of cream from glass every 10 to 20 minutes for every direction. Creams that are in excess are wiped with paper towels. The hands are then washed properly before gloves are removed so that there are no remnants of chemicals.
Majority of people appreciate carved glasses. One is likely to see the carvings in gift shops, glasses and fancy windows. Not many people are involved in the activity, hence it could be very profitable as a business. Most people cherish the sight of the carvings. In fact, it becomes more fun for those that are doing it for fun.
In considering the business of glass carving Alberta business people would need three main things. These are resists, blast cabinet and a well lit studio. It is a business that is profitable if the right marketing is done. Marketing is done by creating brochures, making a website and even setting booths at local events.
The procedure requires three main components; an acid based etching cream, stencils and foam brush. First and foremost, there is placement of the glass piece on a flattened surface, after which it gets sprayed with a suitable cleaner. It is very important that the etching adheres properly to the surface where the carving is being done, which is why as much as possible the surface has to be clean and dry.
When the cleaning of the surface is done with, the surface has to get wiped with a soft cloth. This ensures that it is dry. Also very essential is choosing of the right design that will be carved. Stencil is recommended by most professionals of the arts and craft because with it, there are designs that are already existing. Some stencils come with adhesive backing to ensure they completely adhere to the piece.
For purposes of safety, one should wear goggles and latex gloves during the exercise. There are very strong fumes that are produced from the cream which have diverse effects on different people. People with sensitive eyes especially would have to wear goggles, lest their eyes be affected further. People that are allergic to latex should use rubber gloves or vinyl.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
There should be removal of cream from glass every 10 to 20 minutes for every direction. Creams that are in excess are wiped with paper towels. The hands are then washed properly before gloves are removed so that there are no remnants of chemicals.
Majority of people appreciate carved glasses. One is likely to see the carvings in gift shops, glasses and fancy windows. Not many people are involved in the activity, hence it could be very profitable as a business. Most people cherish the sight of the carvings. In fact, it becomes more fun for those that are doing it for fun.
In considering the business of glass carving Alberta business people would need three main things. These are resists, blast cabinet and a well lit studio. It is a business that is profitable if the right marketing is done. Marketing is done by creating brochures, making a website and even setting booths at local events.
About the Author:
Read more about Procedures Involved In Glass Carving Alberta visiting our website.
No comments:
Post a Comment